Mar 142015
 

I usually try to post only finished stuff on the blog, but I’m making an exception to that rule here. I’ve been building quite a lot of Deadzone terrain recently and made a few discoveries that I’d like to share, so here are a few WIP pics and some tips regarding building the Deadzone scenery

Last year, I bought two boxes of Deadzone Scenery Upgrade Pack. I did this to quickly and (fairly) cheaply get some scifi terrain on the table. I quickly noticed the components wouldn’t last long and invested in three more boxes plus a bagged Defence Line (more on that later).

deadzone_scenery

 

Deadzone Scenery Back

 

I started building rather quickly, but ran out of steam for one reason or other. The project simmered for almost a year and this last week I’ve spent the evenings clipping and building. Here’s what I have ended up with.

Five walkways, two larger buildings, three 2x2 square ones and three smaller buildings, all with detachable roofs.

Five walkways, two larger buildings, three 2×2 square ones and three smaller buildings, all with detachable roofs. Bottom right shows the left-overs. I also managed to cobble together a few barricades from left-over supports and the low wall thingies.

 

All in all I’m pretty happy with how the buildings turned out. I would like a few more small “hab cube” buildings and there are a few other buildings I would’ve liked to do. For instance, more two level buildings. When these are all painted and finished I’ll look into that. For now, I’m done with Deadzone terrain – though I did enjoy putting it all together! Now for some tips. Many (or all) of these might be old hat, but they were mostly my own discoveries so I thought I’d pass them on.

 

Tip 1 – Get more connectors. Now!
When assembling, I soon realized the connectors wouldn’t last. We all know that by now, but for me it was a bit of a surprise. I checked for connector sprues on eBay but couldn’t find any for a decent price. I did however come across the Battlezones: Sci-Fi Defence Line. It came with a connector sprue which isn’t actually needed. Had I bought two of this, I wouldn’t have had to resort to short cuts. Had I bought a pack of four sprues, I probably would have had surplus connectors.

Tip 1. Buy a bag of Defence Line - it includes not only a big lascannon and a little satelite dish, but a full connector sprue!

Defence Line – it includes not only a big lascannon and a little satelite dish, but a full connector sprue! And a defence line, but use that to build fortified watchtowers instead of lame barricades.

 

 Tip 2 – Glue everything together – but dry-fit and plan first!
It might be tempting to just start building, but try to plan out all the buildings you’re doing so that you don’t end up lacking walls, ceilings or connectors. I laid out my buildings in “exploded diagrams” on my work table and portioned out as few connectors as possible. If I hadn’t done that, I wouldn’t have been able to build all the buildings I made. Also, when you come to the final assembly part – glue everything in place! I used Revell’s plastic glue and it worked a treat on the material.

 

Tip 3 – Using supports instead of straight connectors.
In the end, you will most likely run out of connectors. Luckily, there are other pieces you can use instead. I used supports instead of straight connectors on most of my walls.

Supports works fine as straight connectors - as do lamp posts. Too bad I didn't get a photo of one. Use your imagination...

Supports works fine as straight connectors – as do lamp posts. Too bad I didn’t get a photo of one. Use your imagination…

 

Tip 4 – Making straight connectors out of supports.
I ended up needing even more straight connectors than I had, even if I used the supports on exterior walls. The solution was to clip down a few supports into flat straight connectors. These were only used where they wouldn’t be visible, so I didn’t file them or trim them very neatly.

These home made straight connectors were applied on the underside of a roof. I started separating the connector bit from the ends of the support. Finally, I trimmed down the profile. Small clips (and good clippers) are recommended!

These ersatz connectors were applied on the underside of a roof. I first separated the connector from the ends of the support and then clipped off the protruding part from the connector. Small clips (and good clippers) are recommended!

 

Tip 5 – Removable roofs using struts.
When I started building I immediately decided I didn’t just want to block line of sight with the buildings. I wanted to be able to place objectives inside as well. Who knows – eventually I might end up modeling the interiors of some buildings too. To facilitate this, I made the roofs detachable using trimmed struts. It’s important to remember to trim the connector peg that meets the roof. You don’t want that snug snap-fit, they should only be there to keep the roof from sliding off.

Top row shows the roof on and off, while bottom row shows the use of a regular strut and a modified one. Important: Remember to trim the connector peg that meets the roof. You don't want that snap fit, they should only be there to keep the roof from sliding off.

Top row shows the roof on and off, while bottom row shows the use of a regular strut and a modified one. Also, not the trimmed connector pegs.

 

Tip 6 – Making corner connectors out of struts.
To not run out of corner connectors, I had to resort to using struts in some cases. This was mostly done where I had forgotten to include corner connectors for attaching an upper level building to the lower level roof, as I didn’t want to risk wasting valuable corner connectors. I simply cut off and trimmed down the strut so only the connector bit was left. It’s a two snip affair, so not very complicated. If the connector will be visible, it can be a good idea to trim it further.

Four ways to cut a strut.

Four ways to cut a strut. Top left is unmodified, top right was a version I ended up never using. Bottom left is what I used on the roof strut support variant above and bottom right is a corner connector made from a strut.

 

Ersatz corner connectors in use.

Ersatz corner connectors in use.

 

That’s it for now – I have a few more tips related to construction but I’ll get to that when I show the finished pieces instead.

Feb 232013
 

I’ve had need for a few barricades for the next Stillburg scenario for quite some time now. Couldn’t decide on whether to make them myself from scrap, from some metal furniture and carts or to just buy ready made from one of the many resin scenery casters around.

Stumbled across some interesting stuff at Ainsty that would suffice, without being expensive or a serious model to paint. While looking at them, I decided I could probably do just as good myself with some twigs from the yard so I set to it.

Based on masonite, the logs are twigs of your regular garden variety. The supports are cocktail sticks with the pointy bits clipped off.

 

I ended up with five serviceable and useful little pieces, not very pretty or neat – but who will care in the long run? I now have some makeshift barricades to defend Stillburg with. It will be needed.

Urrr… fnarrr… huff… shuffle…

 

In other news, I’m actually painting some models for the first time in ages. I’ve posted a WIP thread over at the BLOOD-forums.

Jul 292010
 

I mentioned previously that I celebrated the end of my four weeks of vacation by assembling a few stands of wood. Decided to share some pictures, I’m well satisfied with how they turned out. Magnetized, removable and pretty decent looking. The trees are dirt cheap “value bag” model railroad junk – but they fill their purpose. One day, when I’m in retirement I suppose, I’ll paint the trunks properly.

 

I’ve also prepared a batch of minis to paint up for the next Stillburg scenario (and then some). A bit unorthodox to share pics of them allready, but I’m really looking forward to painting them and what better motivation than to show them in their unpainted drabness?!


Guess which one I’m currently painting? The first pic is some reinforcements for the undead, while the last two are towns people and adventurers who might join the heroes. All are old Citadel stuff. Details when painted and posted with profiles.

Coming up next; one fully painted mace lady!

May 232010
 

Since I built the first two stands of trees a while back, I’ve been annoyed with the trees being fixed to the base. It made it difficult to place and move miniatures in the woods. I got the idea that I could mount each tree individually on washers and then glue a magnetic strip to the base. This would hold the tree in place and the base could be moved and stored without the trees falling off. It also keeps the trees from toppling over. At the same time, the trees can be removed temporarily when need be. I’ve mounted all my trees on washers now, and built a proof of concept. Images and comments below.




While not perfect, I’m very satisfied with the solution. I need to tidy up the “slots” a bit and maybe try harder to make the trees fit snuggly in all slots but all in all it’s good. Not only good, but good enough!

Coming soon: Zombies, in more than one way. I need to finish my summary of our latest game and I also need to take and post pics of my recently finished fantasy zombies for the Stillburg project!

May 152010
 

I recently found an uhm… “digital copy” of Warhammer Townscapes from 1988. This is one of those awesome products GW put out in the 80s, stuff you could actually get a lot of mileage out of. It’s a hard cover “book”, containing sheets with which you build cardboard buildings.

I’ve printed a few pages and assembled two buildings so far. In want of cardboard, I have instead used foam core sheets. The houses are a lot more stable, but building one includes a lot more work and I think the end result would be tidier if I had the original product. Nevertheless, these houses will serve just fine on our table top and should work wonders when playing in the town of Stillburg. Here are the two buildings done so far. Click for large versions in a new window!

Here are some smaller shots showing the back of the two buildings.

They were used in game yesterday for the first time, when my cousin and I played a highly entertaining game of Song of Blades. I’ll post a session report later today, hopefully. As a teaser, I can say it involved a handfull of very scared villagers and a horde of 38 zombies!